Objet ABS-like Digital Material** (RGD5160-DM) is fabricated from FullCure®515 and FullCure®535.
It is designed to simulate ABS-grade engineering plastics by combining high-temperature resistances with high toughness. The ABS-like Digital Material is suitable for any simulated parts that require high-impact resistance and shock-absorption.
Objet ABS-like Digital Material has a high impact resistance of 65-80J/m (1.22-1.5 ft lb/inch) and a heat deflection temperature (HDT) of 58-68°C (136-154°F) upon removal from the printer. A higher HDT of 82-95°C (179-203°F) can be achieved after thermal post treatment in a programmable oven using different temperature profiles.
Snap-fit parts for high or low temperature usage
Electrical parts casings, mobile telephone casings
Engine parts and covers
* Operating this material requires the installation of an upgrade kit to the Objet Connex 3D printer. To order, please contact your Objet Regional Customer Support Manager.
** For Objet Connex 3D Printers only.